Falkor Phantom 9" M-Lok Tan with RS-3

 

Not another AR pistol!

You should notice that there are too many spec AR pistols flooding the market. Why making another one? Don’t be too quick to judge, There are new and improved ambidextrous controls in this Falkor “Phantom” AEG guns. We add an extended mag release paddle right out of the gate to your already ambi controls. We also use an new ambi 45 degree short throw selector for faster response time, iconic straight trigger gives you more customization options and improve your finger’s position on the trigger. Its trigger shoe is designed wider than regular trigger, thus giving you a greater tactile feel in pulling.

Although the original Falkor Tango angled foregrip and Dragon scale handguard grips do not come with the package, you still able to buy them separately in the market. We are sure that this “Phantom” will get much more with this platform, out of the box, than with any of othe AR Pistol.

Features:

·       Ambi Matched Billet Upper/Lower Receiver

·       New Falkor Extended Mag Release (Ambidextrous)

·       New Falkor Short Throw Safety Selector (Ambidextrous)

·       Flared Magwell w/Magwell Grip

·       APS e-silver edge Gear Box SDU2.0

·       Barrel: 10.5-inch

·       9 ” MLOK™ Transition Handguard

·       Iconic New Straight Trigger:

·       CRS Butt Stock

·       Dracos Ace Muzzle Brake

·       FALKOR MACH 15 Ambi-charging handle

·       FALKOR Tango Fore Grip (Not included, please purchase from aftermarket)

·       FALKOR Dragon Scales (Not included, please purchase from aftermarket)

·       Black, FDE color Offered

After years of development, APS finally released their first Electronic Gear Box, named eSilver Edge Gear Box. A micro chip (Super Dynamic Unit) S.D.U.™  that works together with magnet gears set, reinforced piston, quick change spring guide and micro switch trigger that gives you instant trigger response when shooting.  Below are the features of this eSilver Edge Gear Box:

Outstanding GearBox Specification:

Base on our design and testing, eSilver Edge Gear Box works perfectly under 7.4v to 12.5v. The current are always stable at <11 Amps in any voltages between 7.4v to 12.5v. Low and stable Amps means it drains less battery and the lifespan of the components could last longer.

Use of Advanced S.D.U.™ chips

The S.D.U.™ chipset that used in eSilver Edge Gear Box has a unique function that stop the gearbox from further damage if electric current is too high. Simply to say, electric current / Ampere will increase if there is a malfunction inside the gearbox. For instant, bad motor, damaged gears or short circuit. When our S.D.U. detected more than 5 trigger presses in exceed Amps, the whole gearbox will shut down to prevent further damage. User has to disconnect and then reconnect the power supply to reboot the gearbox, we strongly recommended user to check the internal immediately if mal-function happened.

Micro Switch Trigger

eSilver Edge Gear Box standard comes with micro switch trigger works together with the S.D.U.™,  providing you an instant trigger response when shooting. Base on our testing, the response time of the switch is just 0.02 sec and designed for two hundred thousand press. With the short stroke design of the trigger, it is unbelievable fast and you won’t feel any trigger delay when shooting.

Reinforced parts

APS standard Silver Edge Gear Box has long been famous in its durability. APS eSilver Edge Gear Box further develop its strength, our electronic parts could works between -20°C to 80°C and our mechanical parts could works between -40°C to 85°C. The gear box shell is reinforced, it works under M190 spring used. The rear wires of the gearbox were braided with PET sleeving provides extra protection for the wires. eSilver Edge gearbox standard comes with full steel teeth piston that increase the durability of gearbox too.

eSilver Edge SDU 2.0 gear box

In terms of Gear Box, Ghost Patrol AEG comes with the latest eSilver Edge SDU 2.0 Programable Gear Box made by APS. Simply pressing down the button underneath of the gear box, user can switch its fire selector modes (total 5 different modes). No external device or trigger control are needs, it is easy to program anytime and anywhere by the user.

How to change the firing mode?

Press and hold the button underneath of the gear box reachable from the magwell of the lower receiver. You will see a Red LED light on, hold till you see its blinking 2 times, release the button to accept the changes. Repeat Step 1 to continue your choice.

Choice of Firing Mode:

Mode 1 (Default)	Safe	Semi	Auto
Mode 2	Safe	Semi	Three Burst
Mode 3	Safe	Two Burst	Auto
Mode 4	Safe	Three Burst	Auto
Mode 5	Safe	Three Burst	Nine Burst

**Double click the button or unplug the battery anytime to reset the ECU back to its factory settings (Mode 1) **

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: